English 
RF3826B
锐峰
Equipment Name: RF-3826 semi-automatic glass cutting film machine
Equipment composition: RF-3826 single turn single station automatic glass top table (mechanical type) + RF-3826 semi-automatic cutting machine
Equipment performance:
(1), RF-3826 single turn single station on the stage
Technical Parameters:
1), the size of the upper piece: the lower limit of the upper piece size: 2000*1000mm,Upper plate size upper limit: 3800*2600mm
2), the thickness of the top sheet: 3~19mm
3), the film cycle rate: 25-50 seconds
4), the upper limit of the suction depth: 700mm
5), the upper limit of the upper film: 900KG
6), the number of arms on one side: 3 arms
7), single arm suction cup number: 4
8), the upper flip arm: single turn
9), the film station: single station
10), power / power
Install the power supply: 380V/50HZ (special conditions can be adjusted according to customer requirements)
12), installation power: 4KW
13), compressed air: 0.3Mpa
14), vacuum pressure: -50~70Kpa (according to the thickness of the glass)
(B), RF-3826 semi-automatic glass cutting machine
Basic performance:
1. Equipment specifications:
★Maximable size of cut glass: 3700*2500mm
★Workbench height: 900±50mm.
★ Cutting thickness: 3~19mm
2. Cutting parameters:
★Linear parallelism: ≤0.20mm/m
★ Diagonal accuracy: ≤0.20mm/m (above the accuracy of the cutting line before the cutting line)
★Installation power requirements: 380V/50HZ
★ Actual power of the equipment: 8KW.
★ Compressed air: 0.6PA.
Features: small footprint, simple and safe operation, high speed and high precision, labor saving, high cost performance, simple operation and no requirement for operators. Multi-knife cutting efficiency is high. Large pieces of glass are completely cut in a single pass
Application: glass cutting operation for building glass, cabinet glass, etc.
Equipment Name: RF-3826 semi-automatic glass cutting film machine
Equipment composition: RF-3826 single turn single station automatic glass top table (mechanical type) + RF-3826 semi-automatic cutting machine
Equipment performance:
(1), RF-3826 single turn single station on the stage
Technical Parameters:
1), the size of the upper piece: the lower limit of the upper piece size: 2000*1000mm,Upper plate size upper limit: 3800*2600mm
2), the thickness of the top sheet: 3~19mm
3), the film cycle rate: 25-50 seconds
4), the upper limit of the suction depth: 700mm
5), the upper limit of the upper film: 900KG
6), the number of arms on one side: 3 arms
7), single arm suction cup number: 4
8), the upper flip arm: single turn
9), the film station: single station
10), power / power
Install the power supply: 380V/50HZ (special conditions can be adjusted according to customer requirements)
12), installation power: 4KW
13), compressed air: 0.3Mpa
14), vacuum pressure: -50~70Kpa (according to the thickness of the glass)
(B), RF-3826 semi-automatic glass cutting machine
Basic performance:
1. Equipment specifications:
★Maximable size of cut glass: 3700*2500mm
★Workbench height: 900±50mm.
★ Cutting thickness: 3~19mm
2. Cutting parameters:
★Linear parallelism: ≤0.20mm/m
★ Diagonal accuracy: ≤0.20mm/m (above the accuracy of the cutting line before the cutting line)
★Installation power requirements: 380V/50HZ
★ Actual power of the equipment: 8KW.
★ Compressed air: 0.6PA.
Features: small footprint, simple and safe operation, high speed and high precision, labor saving, high cost performance, simple operation and no requirement for operators. Multi-knife cutting efficiency is high. Large pieces of glass are completely cut in a single pass
Application: glass cutting operation for building glass, cabinet glass, etc.
