RF2520
锐峰
Equipment Specifications:
★Maximable size of cuttable glass: 2500*2000mm
★Workbench height: 900±50mm.
★ Equipment weight: 1.8T.
★ Cutting thickness: 2~19mm
Cutting parameters:
★Linear parallelism: 0.25mm/m
★ Diagonal accuracy: 0.30mm/m (the above accuracy is based on the accuracy of the front cutting line)
★ Cutting bridge speed: 0~160m/min. (Adjustable)
★ Cutting bridge acceleration ≥3.0m/s2
★ cutter head speed ≥150m/min
★The accuracy of the cutter head frame is ≥6.0m/s2
★ air floating transmission
★ Cutting head positioning accuracy error ≤ ± 0.15mm
Power / Power:
★Installation power requirements: 380V/50HZ
★ Actual power of the equipment: 8KW.
★ Compressed air: 0.6PA.
Equipment performance
★ Equipment frame: After aging treatment, the table surface is not deformed, and the parallelism is correct.
★Cutting knife holder: The cutter head rotates 360 degrees, and the upper and lower cutting (any straight line and various shaped glass can be cut)
★ Countertop: waterproof panel. It can effectively prevent moisture and not deform.
★ Felt: Foreign industrial felt (fiber and wool) has good flatness and anti-static.
★ Positioning system: pneumatic mechanical and photoelectric scanning positioning.
★ Oil supply method: pneumatic automatic oil filling. Synchronized with the lower knife,
Mechanical part
★ platen: the foreign Combe version (flatness ≤ ± 0.20mm / m).
★ rack / rail: Japan KHK
★Cutter wheel/wheel clamp: German Bole.
Electrical part
★ Adopt domestic computer host, Microsoft Windows interface.
★ Voltage: 380V/50HZ. The device has a voltage regulator.
★Motor: Yaskawa servo motor (the shape and straight line cutting effect are very good).
★ Guide rail: Taiwan silver
★ rack: KHK
★Proximity switch: Chint
★ Control card: Baolun.
★ The main electrical components: Omron and Chint.
★Pneumatic proportional valve: Japan SMC
★Software: Zhongbao wheel cutting software and optimization software (optional)
Equipment Specifications:
★Maximable size of cuttable glass: 2500*2000mm
★Workbench height: 900±50mm.
★ Equipment weight: 1.8T.
★ Cutting thickness: 2~19mm
Cutting parameters:
★Linear parallelism: 0.25mm/m
★ Diagonal accuracy: 0.30mm/m (the above accuracy is based on the accuracy of the front cutting line)
★ Cutting bridge speed: 0~160m/min. (Adjustable)
★ Cutting bridge acceleration ≥3.0m/s2
★ cutter head speed ≥150m/min
★The accuracy of the cutter head frame is ≥6.0m/s2
★ air floating transmission
★ Cutting head positioning accuracy error ≤ ± 0.15mm
Power / Power:
★Installation power requirements: 380V/50HZ
★ Actual power of the equipment: 8KW.
★ Compressed air: 0.6PA.
Equipment performance
★ Equipment frame: After aging treatment, the table surface is not deformed, and the parallelism is correct.
★Cutting knife holder: The cutter head rotates 360 degrees, and the upper and lower cutting (any straight line and various shaped glass can be cut)
★ Countertop: waterproof panel. It can effectively prevent moisture and not deform.
★ Felt: Foreign industrial felt (fiber and wool) has good flatness and anti-static.
★ Positioning system: pneumatic mechanical and photoelectric scanning positioning.
★ Oil supply method: pneumatic automatic oil filling. Synchronized with the lower knife,
Mechanical part
★ platen: the foreign Combe version (flatness ≤ ± 0.20mm / m).
★ rack / rail: Japan KHK
★Cutter wheel/wheel clamp: German Bole.
Electrical part
★ Adopt domestic computer host, Microsoft Windows interface.
★ Voltage: 380V/50HZ. The device has a voltage regulator.
★Motor: Yaskawa servo motor (the shape and straight line cutting effect are very good).
★ Guide rail: Taiwan silver
★ rack: KHK
★Proximity switch: Chint
★ Control card: Baolun.
★ The main electrical components: Omron and Chint.
★Pneumatic proportional valve: Japan SMC
★Software: Zhongbao wheel cutting software and optimization software (optional)