RF4028C
锐峰
★ Equipment frame: After aging treatment, the table surface is not deformed, and the parallelism is correct.
★Cutting knife holder: The cutter head rotates 360 degrees, and the upper and lower cutting (any straight line and various shaped glass can be cut)
★ Countertop: waterproof panel. It can effectively prevent moisture and not deform.
★ Felt: Foreign industrial felt (fiber and wool) has good flatness and anti-static.
★ Positioning system: pneumatic mechanical and photoelectric scanning positioning.
★ Oil supply method: pneumatic automatic oil filling. Synchronized with the lower knife,
Mechanical part
★ platen: the foreign Combe version (flatness ≤ 0.20mm / m).
★ rack / rail: Japan KHK
★Cutter wheel/wheel clamp: German Bole.
Electrical part
★ Controlled by industrial industrial computer, Microsoft Windows interface.
★ Voltage: 380V/50HZ. The device has a voltage regulator.
★Motor: Yaskawa servo motor (the shape and straight line cutting effect are very good).
★ Guide rail: Taiwan silver
★ rack: KHK
★Proximity switch: Omron
★ Control card: Baolun.
★ The main electrical components: Omron and Schneider.
★Pneumatic proportional valve: Japan SMC
Software
★ Zhongbao wheel cutting software and optimization software (optional)
★ Equipment frame: After aging treatment, the table surface is not deformed, and the parallelism is correct.
★Cutting knife holder: The cutter head rotates 360 degrees, and the upper and lower cutting (any straight line and various shaped glass can be cut)
★ Countertop: waterproof panel. It can effectively prevent moisture and not deform.
★ Felt: Foreign industrial felt (fiber and wool) has good flatness and anti-static.
★ Positioning system: pneumatic mechanical and photoelectric scanning positioning.
★ Oil supply method: pneumatic automatic oil filling. Synchronized with the lower knife,
Mechanical part
★ platen: the foreign Combe version (flatness ≤ 0.20mm / m).
★ rack / rail: Japan KHK
★Cutter wheel/wheel clamp: German Bole.
Electrical part
★ Controlled by industrial industrial computer, Microsoft Windows interface.
★ Voltage: 380V/50HZ. The device has a voltage regulator.
★Motor: Yaskawa servo motor (the shape and straight line cutting effect are very good).
★ Guide rail: Taiwan silver
★ rack: KHK
★Proximity switch: Omron
★ Control card: Baolun.
★ The main electrical components: Omron and Schneider.
★Pneumatic proportional valve: Japan SMC
Software
★ Zhongbao wheel cutting software and optimization software (optional)