Product Introduction:
Basic Performance: The ultra-thin glass cutting machine uses a marble table with high flatness, Taiwan Hiwin guide rails and screw racks, Yaskawa servo motors and other high-performance components to ensure accuracy and stability during the cutting process. It can meet the needs of ultra-thin glass that requires high-precision cutting, such as mobile phone glass, cosmetic mirror box glass, round glass, watch glass, and craft glass. The cutter head can rotate 360°, and both straight and special-shaped cutting can be completed accurately. With a fully automatic loading table, manual intervention is reduced and cutting is more efficient.
Equipment and processing parameters:
1. Equipment parameters
model | 1090 | 1412 | 1614 | 1915 | Can be customized according to cutting size
| power supply
|
Maximum cutting size
| 1000*800mm | 1400*1100mm | 1600*1300mm | 1900*1400mm | 380V/50HZ |
Power
| 3.6kw | 4.3kw | 4.6kw | 5.0kw |
Workbench height：900±50mm |
Scope of application: optoelectronic glass, liquid crystal glass, display glass, mobile phone glass and other ultra-thin glass.
|
2. Component parameters:
Film loading table:
Transmission/flipping motor: Bonfiglioli (Sino-German joint venture)
Low-voltage electrical components: Schneider (France)
PLC control system: Delta (Taiwan)
Inverter: Taiwan Delta
Pneumatic components: Taiwan AirTAC;
Vacuum pump: Shanghai No. 1 Vacuum Pump Factory
Air pressure switch: SMC (Japan)
Photoelectric switch: Beifort (Sino-German joint venture)
Control cable: imported flexible shielded cable
Three suction cup arms on one side, three suction cups on one arm
Roller transmission, single flip single station
Maximum film suction depth: 750mm
Film thickness range: 1.5-6mm
Working cycle: 15-35s adjustable
Gas consumption: 6Kg
Cutting table:
Cutting parameters:
Linear parallelism: 0.1mm
Diagonal accuracy: 0.1mm (the above accuracy is based on the cutting line accuracy before breaking)
Cutting bridge speed: 0~160m/min. (adjustable)
Cutting bridge acceleration ≥3.0m/s²
Cutter head frame speed ≥150m/min
Cutter head frame acceleration ≥6.0m/s²
Cutting head positioning accuracy error: ±0.05mm
3. Equipment performance
Equipment frame: National standard steel is treated with aging to ensure that the table surface is not deformed and the parallelism is accurate.
Cutting knife seat: The knife head rotates 360 degrees, and the upper and lower cutting (can accurately cut any straight line and various special-shaped glass)
Table: Marble
Positioning system: Mechanical positioning.
Oil supply method: pneumatic automatic oiling, synchronized with the lower knife.
4. Mechanical part
Guide rail: Taiwan Hiwin
Rack: Taiwan TBI
Cutter wheel/wheel clamp: Germany Bohler
5. Electrical part
Use domestic computer host, Microsoft Windows interface.
Voltage: 380V/50HZ (customizable)
Motor: German Naiman imported servo motor (good for special-shaped and straight cutting).
Proximity switch: Zhongguan
Control card: Shanghai Weihong
Main electrical components: Schneider
Pneumatic proportional valve: Japan SMC
6. Software:
Cutting software: Shanghai Weihong, supports connection with optimization software and production management software.
Automatically calculate production capacity, optimize cutting path, automatically adjust knife pressure, ensure cutting speed and effect.
Support CAD drawing software, with a variety of cutting libraries, support special-shaped cutting and template scanning functions.
Chinese/English operation interface, automatic correction of origin and cutting accuracy, with drilling pre-positioning and knife head protection.
Production management function: automatically count work data and optimize production plans.
All operation and fault records are automatically saved for easy maintenance.
